Components that were installed:
Elevator / Rudder

2 x

Corona DS 238 MG Digital
4,6 kg | 0,14 Sek. | 22 g

Ailerons

2 x

Turnigy TGY 777 MG Digital
5,5 kg | 0,10 Sek. | 23 g

Flaps

2 x

Corona CS 239 MG Analog
4,6 kg | 0,14 Sek. | 22 g

Engine
(motor camber and side pull = 0°)

2 x

Turnigy D2836/8 1100 kv
Brushless speed controller 2 x Hobbyking YEP 30A (2 ~ 4S) SBEC

Propellers CC / CCW

2 x

Aeronaut CAM carbonLight 9 x 5

Lipo

1 x

Turnigy 3S, 4000 mAh, 30 C

Measurements of various airscrews:|

Lipo:|

airscrews:

motor Turnigy D2836 1100 kv

 3S


3S


3S		 Aeronaut CAM carbonLight 9 x 5
Ampere: 15 | Watt: 151

Graupner E-Prop 9 x 5
Ampere: 13 | Watt: 135

Graupner E-Prop 8 x 5
Ampere: 13,6 | Watt: 156
 
  4S Graupner E-Prop 8 x 5
Ampere: 18 | Watt: 269

 

Weights of individual components - take-off weight!
     
Fuselage   1027,0 g
Lead in the head   317,0 g
3S-Lipo Akku 4000 mAh   301,0 g
     
Wing right
incl. motor, controller and two servos as well as wiring		   1.063,0 g
Wing left
incl. motor, controller and two servos as well as wiring		   1.053,0 g
Plug-in tube, CfK   30,0 g
     
Total- Take-off weight   3.801,0 g